Multimatic® 200 Multiprocess Welder

Features

• Multiprocess Capabilities - MIG, flux-cored, DC stick and DC TIG processes, allowing you to build your skills.

• Auto-Set™ Elite - Auto-Set Elite can be used on multiple materials and multiple processes with the ability to fine-tune your settings. Simple to set up and use!

• Inverter Technology - Inverter technology combines best-in-class arc characteristics with the portability of a 29-pound machine. The arc is extremely forgiving to variations in arc length and travel speeds.

• Ultimate Durability - The Multimatic 200's impact-resistant case provides strength and durability, protecting the internal components and welding wire.

• Excellent Arc Characteristics - Multimatic 200 offers positive arc starts and an extremely stable arc with minimal spatter on both mixed gases and straight CO2.

• Plugs in Anywhere! - Multi-voltage plug (MVP™) allows you to connect to common 120 or 230 V power receptacles without the use of any tools—choose the plug that fits the receptacle and connect it to the power cord.

• Simple Aluminum Solutions - Direct-connect spool guns are a reliable and economical solution for welding aluminum.

• TIG Contractor Kit - The Multimatic 200 DC TIG Contractor Kit gives you everything you need for remote DC TIG welding with the Multimatic 200.

• Fan-On-Demand - Miller's Fan-On-Demand technology operates only when needed reducing noise, power consumption and the amount of airborne contaminants pulled through the machine.

• Miller's Auto-Line Technology - Provides state-of-the-art flexibility, automatically connecting to 120 or 230 VAC, single-phase power without removing the cover to re-link the power source. See how it works. 

• Generator Compatible - The Multimatic 200 will be able to operate and provide full output when powered by generators with 8000 Watt (8K) output or higher, such as a Miller Bobcat or Trailblazer series generator. Limited output will occur when used with smaller generators.

INCLUDED

• Multimatic 200

• 10-ft. (3 m) MDX™-250 MIG gun

• 13-ft. (4 m) lead with electrode holder and 25-mm Dinse connector

• 10-ft. (3 m) work lead with clamp and 25-mm Dinse connector

• Argon and AR/CO2 mix regulator/flow gauge with 12-ft. (3.7 m) hose

• Power cord and MVP plugs for 120 and 240 V

• Quick Select™ drive roll for .024 in (0.6 mm) or .030/.035 in (0.8/0.9 mm) solid wire, and .030/.035 (0.8/0.9 mm) flux cored wire

• Two contact tips for .030-in. (0.8 mm) wire, and two contact tips for .035-in. (0.9 mm) wire

• Material thickness gauge #229895

• Information/settings chart and quick setup guide

PROCESSES

• Flux Cored (FCAW)

• MIG (GMAW)

• Multiprocess

• Stick (SMAW)

• TIG (GTAW)