Skip to content
XMT® 350 FieldPro™, Tweco®, ArcReach® SuitCase® 12, Bernard™ BTB 300 A Gun Pkg
Every year, outdated welding equipment can cost you thousands of dollars and hundreds of hours of productive time. Step up to Miller XMT 350 FieldPro systems with ArcReach® technology — and improve your bottom line!
Features
- ArcReach® Technology - ArcReach capabilities increase jobsite productivity and efficiency by eliminating the time spent tracing weld cables hundreds of feet back to the power source because weld operators can make voltage adjustments at the ArcReach wire feeder or remote.
- Cable Length Compensation - Cable Length Compensation (CLC™) ensures that the voltage a weld operator sets is the voltage they get by automatically adjusting voltage based on weld cable length, even hundreds of feet away from the power source (available only with XMT 350 FieldPro Systems).
- Exceptional Arc Performance - XMT 350 FieldPro systems maximize weld quality, reduce training time and minimize weld defects even while using weld cables that are hundreds of feet long.
- Increased Uptime - XMT 350 FieldPro welders and ArcReach accessories have been extensively field-proven and deliver the performance you need with ruggedly constructed internal components and Wind Tunnel Technology™.
- Improved Jobsite Safety - The chances of slip, trip and fall injuries are decreased because ArcReach technology allows weld operators to make parameter changes at the wire feeder or remote instead of having to travel through multistory and cluttered jobsites back to the power source.
- Maximum Fleet Compatibility - Maximize fleet compatibility and get the benefits of ArcReach when you pair XMT 350 FieldPro welders and ArcReach feeders with other ArcReach compatible products.
- Adjust While Welding - Weld operators have more control and can Adjust While Welding (AWW™) to make fast, easy weld parameter changes at the wire feeder or remote — even while the arc is on. Only Miller offers this advanced solution (available only with XMT 350 FieldPro Systems).
- Control Panel Lock Out - Inadvertent parameter changes by other jobsite workers can be avoided because connecting an ArcReach accessory to the power source automatically locks out the power source’s panel controls.
- Auto-Process Select™ - Decrease the chance of an incorrect weld process being used because Auto-Process Select automatically sets the power source to the correct weld process based on the polarity applied to the weld accessory.
- Auto-Line™ Technology - Work in more places with Auto-Line technology which automatically calibrates the power source to operate properly when connected to any primary input voltage ranging from 208-575 volts, single- or three-phase, 50 or 60 Hz — with no manual linking required.
- ArcReach Heater Compatibility - Take charge of your field preheat and bakeout applications up to 600 degrees Fahrenheit (315°C). This system uses induction heating to generate heat in workpieces, so welders can do their own preheating quickly and safely. A part of the ArcReach technology platform, the ArcReach Heater is an accessory for select ArcReach welding power sources.
INCLUDED
- XMT® 350 FieldPro™
- ArcReach® SuitCase® 12
- Bernard™ BTB Gun 300 AMP, 15FT
- .045 - 1/16 reversible dual VK drive rolls
- CENTERFIRE contact tips, .045 (QTY 3), .052 (QTY 2)
PROCESSES
- Air Carbon Arc Cutting and Gouging (CAC-A)
- Flux Cored (FCAW)
- MIG (GMAW)
- Stick (SMAW)
- TIG DC (GTAW-DC)
Applications
- Aerospace
- Construction
- Cross Country Pipeline
- Education/Training
- Fabrication
- Heavy Equipment Manufacturing
- Infrastructure
- Maintenance and Repair - Field Operations
- Maintenance and Repair - In Plant
- Pressure Vessel
- Pipe Fabrication/Construction
- Shipbuilding
- Mechanical Contracting
| Item | Multiprocess Welder |
| Series | XMT 350 FieldPro |
| Input Voltage | 208V AC, 220/230/240V AC, 380/400V, 460/480V AC, 575V AC |
| Phase | Single- / Three-Phase |
| Welding Mode | CC / CV |
| Polarity | DC |
| Input Frequency | 50 / 60 Hz |
| Welding Processes | Flux-Cored Welding (FCAW), MIG Welding (GMAW) |
| MIG Welding Maximum Output Crrent | 425 Amps |
| For Wire Type | Flux-Cored |
| Maximum Wire Diamater | 0.052 in (Solid), 5/64 in (Flux-Cored) |
| Maximum Wire Feed Speed | 780 in /MIN |
| Model | 951734 |
| MIG Welding Output @ Duty Cycle | 300 Amps @ 32 VDC, 60%, 350 Amps @ 34 VDC, 60% |
| Includes | (2) Centerfire 0.052 in Contact Tips, (3) Centerfire 0.045 in Contact Tips, 0.045 - 1/16 in Reversible Dual VK Drive Rolls, 15 ft 300 A Bernard BTB MIG Gun, ArcReach SuitCase 12 |
| Weight | 93 lb |
| Application | Construction, Power Generation Plants, Rental Fleets, Shipbuilding |
| Features | Adaptive Hot Start, Adjust While Welding(TM), Auto-Bind, Auto-Line, Cable Length Compensation(TM), Durability, Fan-On-Demand(TM), Fleet Compatibility, Infinite Arc Control, Jobsite Mobility, Lift-Arc, Lightweight Aluminum Case, Process Selector Switch, RMD(R) and Pulse Welding, True Multiprocess System, Tweco-Style Weld Disconnects, Wind Tunnel Technology(TM) |
| For Material Type | Special Metals, Stailess Steel, Steel |
| Max. Input Current | 40.4 Amps @ 208V AC (Three-Phase), 60.8 Amps @ 208V AC (Single-Phase) |
| TIG Welding Minimum Output Current | 5 Amps |
| MIG WeldingMinimum Output Current | 5 Amps |
| Minimum Wire Diameter | 0.023 in (Solid Wire), 0.30 in (Flux-Cored) |
| Minimum Wire Feed Speed | 50 in / Min |
| Open Circuit Voltage | 75 V DC |
| Overall Depth | 24 in |
| Overall Height | 17 in |
| Overall Width | 12.5 in |
| Plug type | Bare Leads |
| Power Cord included | No |
| Standard | CSA |
XMT® 350 FieldPro™, Tweco®, ArcReach® SuitCase® 12, Bernard™ BTB 300 A Gun Pkg
Every year, outdated welding equipment can cost you thousands of dollars and hundreds of hours of productive time. Step up to Miller XMT 350 FieldPro systems with ArcReach® technology — and improve your bottom line!
Features
- ArcReach® Technology - ArcReach capabilities increase jobsite productivity and efficiency by eliminating the time spent tracing weld cables hundreds of feet back to the power source because weld operators can make voltage adjustments at the ArcReach wire feeder or remote.
- Cable Length Compensation - Cable Length Compensation (CLC™) ensures that the voltage a weld operator sets is the voltage they get by automatically adjusting voltage based on weld cable length, even hundreds of feet away from the power source (available only with XMT 350 FieldPro Systems).
- Exceptional Arc Performance - XMT 350 FieldPro systems maximize weld quality, reduce training time and minimize weld defects even while using weld cables that are hundreds of feet long.
- Increased Uptime - XMT 350 FieldPro welders and ArcReach accessories have been extensively field-proven and deliver the performance you need with ruggedly constructed internal components and Wind Tunnel Technology™.
- Improved Jobsite Safety - The chances of slip, trip and fall injuries are decreased because ArcReach technology allows weld operators to make parameter changes at the wire feeder or remote instead of having to travel through multistory and cluttered jobsites back to the power source.
- Maximum Fleet Compatibility - Maximize fleet compatibility and get the benefits of ArcReach when you pair XMT 350 FieldPro welders and ArcReach feeders with other ArcReach compatible products.
- Adjust While Welding - Weld operators have more control and can Adjust While Welding (AWW™) to make fast, easy weld parameter changes at the wire feeder or remote — even while the arc is on. Only Miller offers this advanced solution (available only with XMT 350 FieldPro Systems).
- Control Panel Lock Out - Inadvertent parameter changes by other jobsite workers can be avoided because connecting an ArcReach accessory to the power source automatically locks out the power source’s panel controls.
- Auto-Process Select™ - Decrease the chance of an incorrect weld process being used because Auto-Process Select automatically sets the power source to the correct weld process based on the polarity applied to the weld accessory.
- Auto-Line™ Technology - Work in more places with Auto-Line technology which automatically calibrates the power source to operate properly when connected to any primary input voltage ranging from 208-575 volts, single- or three-phase, 50 or 60 Hz — with no manual linking required.
- ArcReach Heater Compatibility - Take charge of your field preheat and bakeout applications up to 600 degrees Fahrenheit (315°C). This system uses induction heating to generate heat in workpieces, so welders can do their own preheating quickly and safely. A part of the ArcReach technology platform, the ArcReach Heater is an accessory for select ArcReach welding power sources.
INCLUDED
- XMT® 350 FieldPro™
- ArcReach® SuitCase® 12
- Bernard™ BTB Gun 300 AMP, 15FT
- .045 - 1/16 reversible dual VK drive rolls
- CENTERFIRE contact tips, .045 (QTY 3), .052 (QTY 2)
PROCESSES
- Air Carbon Arc Cutting and Gouging (CAC-A)
- Flux Cored (FCAW)
- MIG (GMAW)
- Stick (SMAW)
- TIG DC (GTAW-DC)
Applications
- Aerospace
- Construction
- Cross Country Pipeline
- Education/Training
- Fabrication
- Heavy Equipment Manufacturing
- Infrastructure
- Maintenance and Repair - Field Operations
- Maintenance and Repair - In Plant
- Pressure Vessel
- Pipe Fabrication/Construction
- Shipbuilding
- Mechanical Contracting
| Item | Multiprocess Welder |
| Series | XMT 350 FieldPro |
| Input Voltage | 208V AC, 220/230/240V AC, 380/400V, 460/480V AC, 575V AC |
| Phase | Single- / Three-Phase |
| Welding Mode | CC / CV |
| Polarity | DC |
| Input Frequency | 50 / 60 Hz |
| Welding Processes | Flux-Cored Welding (FCAW), MIG Welding (GMAW) |
| MIG Welding Maximum Output Crrent | 425 Amps |
| For Wire Type | Flux-Cored |
| Maximum Wire Diamater | 0.052 in (Solid), 5/64 in (Flux-Cored) |
| Maximum Wire Feed Speed | 780 in /MIN |
| Model | 951734 |
| MIG Welding Output @ Duty Cycle | 300 Amps @ 32 VDC, 60%, 350 Amps @ 34 VDC, 60% |
| Includes | (2) Centerfire 0.052 in Contact Tips, (3) Centerfire 0.045 in Contact Tips, 0.045 - 1/16 in Reversible Dual VK Drive Rolls, 15 ft 300 A Bernard BTB MIG Gun, ArcReach SuitCase 12 |
| Weight | 93 lb |
| Application | Construction, Power Generation Plants, Rental Fleets, Shipbuilding |
| Features | Adaptive Hot Start, Adjust While Welding(TM), Auto-Bind, Auto-Line, Cable Length Compensation(TM), Durability, Fan-On-Demand(TM), Fleet Compatibility, Infinite Arc Control, Jobsite Mobility, Lift-Arc, Lightweight Aluminum Case, Process Selector Switch, RMD(R) and Pulse Welding, True Multiprocess System, Tweco-Style Weld Disconnects, Wind Tunnel Technology(TM) |
| For Material Type | Special Metals, Stailess Steel, Steel |
| Max. Input Current | 40.4 Amps @ 208V AC (Three-Phase), 60.8 Amps @ 208V AC (Single-Phase) |
| TIG Welding Minimum Output Current | 5 Amps |
| MIG WeldingMinimum Output Current | 5 Amps |
| Minimum Wire Diameter | 0.023 in (Solid Wire), 0.30 in (Flux-Cored) |
| Minimum Wire Feed Speed | 50 in / Min |
| Open Circuit Voltage | 75 V DC |
| Overall Depth | 24 in |
| Overall Height | 17 in |
| Overall Width | 12.5 in |
| Plug type | Bare Leads |
| Power Cord included | No |
| Standard | CSA |
BETTER TOGETHER
This item would go well with:
RECENTLY VIEWED
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.