Skip to content
Miller® Bobcat™ 260 Welder With Remote Start/Stop 907792001
The Miller® Bobcat™ 260 welder with Remote Start/Stop is a 260 amp gasoline engine driven welder and 11,000 generator in one. Remote Start/Stop allows you to start and shut down your Bobcat 260 with wireless fob, saving you time and money. Remote fob is rugged, water resistant. Wireless control beeps and lights up to confirm that the Bobcat's engine has started or has been shut down. Welder comes complete with one wireless start/stop fob. The new Bobcat™ 260 also has an amp/volt range of 40 – 260 Amps, a gain of 10 amps over the Bobcat 250.
The Bobcat™ 260 It is fuel efficient and very quiet. The smaller and lighter design means the Bobcat 260 is easier to transport and maintain.
The Bobcat™ 260 It is fuel efficient and very quiet. The smaller and lighter design means the Bobcat 260 is easier to transport and maintain.
- NEW Remote Start/Stop- Take control and eliminate noise. Easily turn your Bobcat machine on and off remotely so it only runs when you need it. Get more out of each tank, extend time between maintenance and work without the hassle of walking back to your machine. The remote start/stop on Bobcat 260 welder/generators is installed and backed by Miller — so it’s just as easy to use and dependable as your Bobcat machine.
- Simple: One button to start and stop the Bobcat.
- Durable: Tough and water-resistant with a three-year warranty.
- Two-Way Communication: After start or stop command is received by the Bobcat, the fob lights up and beeps.
- Savings On Fuel And Maintenance- A Bobcat welder/generator with remote start/stop is quick and easy to turn off when it’s not being used. You spend less money on fuel, and less time and money on maintenance because there are fewer engine hours.
- Jobsite Safety- The noise of a welder/generator running all day is irritating — and can even keep you from hearing sounds that warn you of potential hazards. When you turn your Bobcat off with remote start/stop, you’ll help create a safer environment by reducing the number of machines running on a jobsite and increasing your awareness of warning sounds.
- Hands-Free Starting- Carbureted Bobcat welder/generators now have eChoke™ technology, which automatically sets the proper air/fuel mixture and eliminates the need to manually engage the choke, so cold-starting is now hands free. (eChoke is a trademark of Kohler Co.)
- Designed For Reliability- From Appleton, Wisconsin USA, our welder/generators are the most rugged, durable and long-lasting in the industry. We manufacture them to exceed requirements for extreme working conditions and they are hard-working from the core with:
- Copper windings and iron generator components for a quality-built machine
- Lugged — not soldered — heavy internal leads for better field durability
- Superior cooling technology for maximum performance and engine life
- Protective doors to cover the weld studs and receptacles as required by OSHA and CSA for jobsite safety
- Lift hook integrated into the center frame, which bolts to the machine’s base for greater durability
- Small, Light Design- Bobcat welder/generators take up less space on trucks and trailers — leaving more room on your truck for other equipment and tools. Plus, they’re easy to move around jobsites — even with weld cables attached.
- Easy Maintenance- With its intuitive design, the daily maintenance of our Bobcat welder/generators is fast and easy. Front panel maintenance displays help you know when your equipment needs to be serviced. And servicing is simple because of:
- Oil checks that can be performed easily through the top of the machine by the access door
- Toolless panels that allow for quick access
- Single-side fuel fill and oil drain/filter
Processes
- Stick Welding (SMAW)
- Flux Cored Welding (FCAW)
- MIG Welding (GMAW)
- DC TIG Welding (GTAW)
- Non-Critical AC TIG Welding (GTAW)
- Air Carbon Arc (CAC-A) Cutting and Gouging (3/16 in carbons)
- Air Plasma Cutting and Gouging with optional Spectrum models
Applications
- Industrial Applications
- Maintenance
- Repair
- Farm/Ranch Applications
- Fabrication
- Structural Steel Work
- Use as a Stand-Alone Generator
| Item | Engine Driven Welder/Generator with Remote Start/Stop |
| Title | Bobcat™ 260 with Remote Start/Stop |
| Brand Name | Miller Electric |
| Industries Interests | Fabrication Farm and Ranch Infrastructure Maintenance and Repair - Field Operations Work / Service Trucks Education / Training |
| Engine Brand | Kohler |
| Speed Rating | 2300 RPM (ldle), 3600 RPM (Weld) |
| Fuel Tank Size | 12 gal. |
| Fuel Type | Gasoline |
| Horsepower | 23.5 hp |
| Weldable Metals | Aluminum,Stainless Steel, Steel |
| Power Rating | 9,500W (Continous), 11,000W (Peak) |
| Rated Output | CC/AC: 225 Amps at 25 V, 100% duty cycle / 260 Amps at 25 V, 60% duty cycle; CC/DC: 260 Amps at 25 V, 100% duty cycle; CV/DC: 260 Amps at 28 V, 100% duty cycle / 275 Amps at 25 V, 60% duty cycle |
| Sound Rating | 72.5 dB/72 dB at max. load/150 Amps |
| Current Type | AC / DC |
| Amperage Range | 40 - 260 Amps |
| Portability | Lift Eye (Standard), Running Gear / Cart (Optional), Trailer (Optional) |
| Weld Output | CC/CV |
| Net Width | 20 in |
| Net Height | 28 in |
| Net Length | 40.5 in |
| Net Weight | 501 lb |
Miller® Bobcat™ 260 Welder With Remote Start/Stop 907792001
The Miller® Bobcat™ 260 welder with Remote Start/Stop is a 260 amp gasoline engine driven welder and 11,000 generator in one. Remote Start/Stop allows you to start and shut down your Bobcat 260 with wireless fob, saving you time and money. Remote fob is rugged, water resistant. Wireless control beeps and lights up to confirm that the Bobcat's engine has started or has been shut down. Welder comes complete with one wireless start/stop fob. The new Bobcat™ 260 also has an amp/volt range of 40 – 260 Amps, a gain of 10 amps over the Bobcat 250.
The Bobcat™ 260 It is fuel efficient and very quiet. The smaller and lighter design means the Bobcat 260 is easier to transport and maintain.
The Bobcat™ 260 It is fuel efficient and very quiet. The smaller and lighter design means the Bobcat 260 is easier to transport and maintain.
- NEW Remote Start/Stop- Take control and eliminate noise. Easily turn your Bobcat machine on and off remotely so it only runs when you need it. Get more out of each tank, extend time between maintenance and work without the hassle of walking back to your machine. The remote start/stop on Bobcat 260 welder/generators is installed and backed by Miller — so it’s just as easy to use and dependable as your Bobcat machine.
- Simple: One button to start and stop the Bobcat.
- Durable: Tough and water-resistant with a three-year warranty.
- Two-Way Communication: After start or stop command is received by the Bobcat, the fob lights up and beeps.
- Savings On Fuel And Maintenance- A Bobcat welder/generator with remote start/stop is quick and easy to turn off when it’s not being used. You spend less money on fuel, and less time and money on maintenance because there are fewer engine hours.
- Jobsite Safety- The noise of a welder/generator running all day is irritating — and can even keep you from hearing sounds that warn you of potential hazards. When you turn your Bobcat off with remote start/stop, you’ll help create a safer environment by reducing the number of machines running on a jobsite and increasing your awareness of warning sounds.
- Hands-Free Starting- Carbureted Bobcat welder/generators now have eChoke™ technology, which automatically sets the proper air/fuel mixture and eliminates the need to manually engage the choke, so cold-starting is now hands free. (eChoke is a trademark of Kohler Co.)
- Designed For Reliability- From Appleton, Wisconsin USA, our welder/generators are the most rugged, durable and long-lasting in the industry. We manufacture them to exceed requirements for extreme working conditions and they are hard-working from the core with:
- Copper windings and iron generator components for a quality-built machine
- Lugged — not soldered — heavy internal leads for better field durability
- Superior cooling technology for maximum performance and engine life
- Protective doors to cover the weld studs and receptacles as required by OSHA and CSA for jobsite safety
- Lift hook integrated into the center frame, which bolts to the machine’s base for greater durability
- Small, Light Design- Bobcat welder/generators take up less space on trucks and trailers — leaving more room on your truck for other equipment and tools. Plus, they’re easy to move around jobsites — even with weld cables attached.
- Easy Maintenance- With its intuitive design, the daily maintenance of our Bobcat welder/generators is fast and easy. Front panel maintenance displays help you know when your equipment needs to be serviced. And servicing is simple because of:
- Oil checks that can be performed easily through the top of the machine by the access door
- Toolless panels that allow for quick access
- Single-side fuel fill and oil drain/filter
Processes
- Stick Welding (SMAW)
- Flux Cored Welding (FCAW)
- MIG Welding (GMAW)
- DC TIG Welding (GTAW)
- Non-Critical AC TIG Welding (GTAW)
- Air Carbon Arc (CAC-A) Cutting and Gouging (3/16 in carbons)
- Air Plasma Cutting and Gouging with optional Spectrum models
Applications
- Industrial Applications
- Maintenance
- Repair
- Farm/Ranch Applications
- Fabrication
- Structural Steel Work
- Use as a Stand-Alone Generator
| Item | Engine Driven Welder/Generator with Remote Start/Stop |
| Title | Bobcat™ 260 with Remote Start/Stop |
| Brand Name | Miller Electric |
| Industries Interests | Fabrication Farm and Ranch Infrastructure Maintenance and Repair - Field Operations Work / Service Trucks Education / Training |
| Engine Brand | Kohler |
| Speed Rating | 2300 RPM (ldle), 3600 RPM (Weld) |
| Fuel Tank Size | 12 gal. |
| Fuel Type | Gasoline |
| Horsepower | 23.5 hp |
| Weldable Metals | Aluminum,Stainless Steel, Steel |
| Power Rating | 9,500W (Continous), 11,000W (Peak) |
| Rated Output | CC/AC: 225 Amps at 25 V, 100% duty cycle / 260 Amps at 25 V, 60% duty cycle; CC/DC: 260 Amps at 25 V, 100% duty cycle; CV/DC: 260 Amps at 28 V, 100% duty cycle / 275 Amps at 25 V, 60% duty cycle |
| Sound Rating | 72.5 dB/72 dB at max. load/150 Amps |
| Current Type | AC / DC |
| Amperage Range | 40 - 260 Amps |
| Portability | Lift Eye (Standard), Running Gear / Cart (Optional), Trailer (Optional) |
| Weld Output | CC/CV |
| Net Width | 20 in |
| Net Height | 28 in |
| Net Length | 40.5 in |
| Net Weight | 501 lb |
BETTER TOGETHER
This item would go well with:
RECENTLY VIEWED
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.