Skip to content
SKYTIG 2035 AC/DC
Easy tune en AC / DC
A machine design for the most demanding welders, with its 10 initial amps, AC and DC current with a high frequency start (HF) allow to weld any type of materials. Easy-to-use panel, with synergic mode of balance and wave offset, excellent welding quality with easy tune. Allows to weld all coated rods like 7018, 6013, 6011, AL…
Features
- Makes easier to START the ARC, preheating the rod.
- Improves the ARC STABILITY, and prevents the rod from sticking.
- If the rod sticks, the machine will stop the power, so it can start again easily.
- Makes easier the start of the Arc in TIG without contaminating the tungsten.
- The ultimate technology by microprocessor to provide you the BEST ARC.
- Simple design and easy tu regulate.
- ULTRA POWER, it’s a technology SWEISS exclusive, allows to connect the machine power source from 95 to 270V. Saves 40% of electric consumption. Allows to use power generators about 30% smaller. More power when plug to 110V.
Included
- Rod Holder set, 3m cable, cu16. – (SWKPE163)
- Earth clamp set, 3m cable, cu16.- (SWKPM163)
- TIG torch SR17 4m. (SWTTC1) 35/50 – TITAN TIG.- (T1 – 115)
- External pedal regulation. – (G2 – 101)
| Item | Sweiss® Welder SKYTIG2035 AC/DC |
| Amperage | 5-200Amps |
| Duty cycle at 40°C | 35% |
| Current type | AC / DC |
| Ocv | 50V – 95V (ULTRA ARC)) |
| Input voltage | 110 / 220V (1Ph) |
| Frequency | 50 / 60 Hz |
| Max. consumption (110/220V) | 35 – 35Amps |
| TIG | HF Pulse |
| Weight | 18 Kg |
| Dimensions (mm) | 450x250x500 |
| IP | IP23S |
| Insulation | F |
| Connection type | 1/2 Ph |
| Rods | Ø – 12mm. (1/2”) |
| Fast connectors (DINSE) | 35/50 |
| Front/back material | Plástico |
| Casing material0 | Acero |
| Regulations | CE, EN-60974-1, EN-60974-10 |
| Rod Types | 6013, 7018, 6011, SS… |
| Sweiss code | SWT2035 |
SKYTIG 2035 AC/DC
Easy tune en AC / DC
A machine design for the most demanding welders, with its 10 initial amps, AC and DC current with a high frequency start (HF) allow to weld any type of materials. Easy-to-use panel, with synergic mode of balance and wave offset, excellent welding quality with easy tune. Allows to weld all coated rods like 7018, 6013, 6011, AL…
Features
- Makes easier to START the ARC, preheating the rod.
- Improves the ARC STABILITY, and prevents the rod from sticking.
- If the rod sticks, the machine will stop the power, so it can start again easily.
- Makes easier the start of the Arc in TIG without contaminating the tungsten.
- The ultimate technology by microprocessor to provide you the BEST ARC.
- Simple design and easy tu regulate.
- ULTRA POWER, it’s a technology SWEISS exclusive, allows to connect the machine power source from 95 to 270V. Saves 40% of electric consumption. Allows to use power generators about 30% smaller. More power when plug to 110V.
Included
- Rod Holder set, 3m cable, cu16. – (SWKPE163)
- Earth clamp set, 3m cable, cu16.- (SWKPM163)
- TIG torch SR17 4m. (SWTTC1) 35/50 – TITAN TIG.- (T1 – 115)
- External pedal regulation. – (G2 – 101)
| Item | Sweiss® Welder SKYTIG2035 AC/DC |
| Amperage | 5-200Amps |
| Duty cycle at 40°C | 35% |
| Current type | AC / DC |
| Ocv | 50V – 95V (ULTRA ARC)) |
| Input voltage | 110 / 220V (1Ph) |
| Frequency | 50 / 60 Hz |
| Max. consumption (110/220V) | 35 – 35Amps |
| TIG | HF Pulse |
| Weight | 18 Kg |
| Dimensions (mm) | 450x250x500 |
| IP | IP23S |
| Insulation | F |
| Connection type | 1/2 Ph |
| Rods | Ø – 12mm. (1/2”) |
| Fast connectors (DINSE) | 35/50 |
| Front/back material | Plástico |
| Casing material0 | Acero |
| Regulations | CE, EN-60974-1, EN-60974-10 |
| Rod Types | 6013, 7018, 6011, SS… |
| Sweiss code | SWT2035 |
BETTER TOGETHER
This item would go well with:
RECENTLY VIEWED
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.